Issue 1601 or 1602:
When trying to restore your iPhone in iTunes, you may see the following message followed by an error code 1601 or 1602:
The iPhone could not be restored. An unknown error occurred.
Or when trying to restore your iPod touch in iTunes, you may see the following message:
The iPod "[username]" could not be restored. An unknown error occurred (1602)
Solution
Completely remove iTunes and Apple Mobile Device support and then reinstall iTunes . Click the appropriate link below for instructions on how to accomplish this for your operating system.
Error 20
Error when downgrading
هذا العطل يظهر بسبب محاولة العميل عمل
downgrading
Error 21
Custom firmware restore fail (PwnageTool since 4.1). You have to put your device into the DFU mode and not into recovery mode. Device won't boot correctly an stuck at the Apple logo after the error. Press and hold power and home button until it reboots.
Error 21
Custom firmware restore fail (PwnageTool since 4.1). You have to put your device into the DFU mode and not into recovery mode. Device won't boot correctly an stuck at the Apple logo after the error. Press and hold power and home button until it reboots.
هذا العطل يظهر للعميل عندما يقوم بعمل الجيل بريك ولكن لم يكتمل
Error 23
Cannot restore or update due to hardware problems.
• In software you have to set default web browser.
• In hardware, it's a communication problem. Check all connections, also try to change battery.
• faulty baseband flash or processor
• Happens frequently after water damage. Remove and clean motherboard.
Error 26
False version of the NOR flash firmware. Use the correct sn0wbreeze version.
Error 28
Hardware error. Return your device to Apple if possible. The problem is a bad dock connector on the iPhone. Must change the connector.
Error 29
See Apple discussions thread about this problem. You might need to change the battery.
Error 34
Hard disk is run out of space when trying to download TV show's or movie's Please clear space and then continue downloading.
Error 1002
Error when restoring.
Error 23
Cannot restore or update due to hardware problems.
• In software you have to set default web browser.
• In hardware, it's a communication problem. Check all connections, also try to change battery.
• faulty baseband flash or processor
• Happens frequently after water damage. Remove and clean motherboard.
Error 26
False version of the NOR flash firmware. Use the correct sn0wbreeze version.
Error 28
Hardware error. Return your device to Apple if possible. The problem is a bad dock connector on the iPhone. Must change the connector.
Error 29
See Apple discussions thread about this problem. You might need to change the battery.
Error 34
Hard disk is run out of space when trying to download TV show's or movie's Please clear space and then continue downloading.
Error 1002
Error when restoring.
يحدث في بعض الحالات بسبب عطل البطاريه حيث ان الجهاز لايستطيع عمل بوت باستخدام الطاقه من البطاريه
Error 1004
This is caused by a failure to match the Baseband Nonce currently in memory to the nonce returned in the Baseband Firmware SHSH blob. This happens if you edited the hosts file (Saurik's Server) or you are using TinyUmbrella. Use TinyUmbrella and "Kick Device Out Of Recovery" to boot.
Error 1011
This is caused by recovery mode being in (4.2.1 firmware). The file iTunesMobileDevice.dll is damaged or updated.
Error 1013
iPhone 4
This means that the baseband did not get updated. Either remove the gs.apple.com entry from your hosts file and let the baseband upgrade or if you want to preserve the baseband just jailbreak at this point to boot it up.
Other Devices
Restart computer; change computer; reinstall system, if iPhone is always in restoring mode: XP users can jump from restoring mode with ibus; MAC users can use iNdependence. (usually on the iPhone with downgraded
Error 1014
This occurs when you try to downgrade your phone's baseband.
Error 1015
This error is common when downgrading iPhones and 3G-enabled iPads. The problem occurs when the device's baseband has a higher version number than the baseband in the firmware you restored to. Just set auto-boot true in iRecovery or use iREB/TinyUmbrella/RecBoot.
Error 1394
When Spirit2Pwn flashes parts of the boot chain on iOS 4, the device may crash into DFU(Device Firmware Upgrade) Mode. [1]
Error 1413
Restart computer; change USB port; reinstall system.
Error 1415
Restart computer; change USB port; reinstall system.
Error 1417
Restart computer; change USB port; reinstall system.
Error 1418
Restart computer; change USB port; reinstall system.
Error 1428
Restart computer; change USB port; reinstall system.
Error 1050
Bad response from gs.apple.com OR need iReb for preparing iPhone for restoring to custom ipsw
Error 1600
Custom firmware can't be restored on a device with DFU Mode. The software of the iPhone isn't patched. Go into Recovery Mode (Pwnage Tool up to 4.0.1) or start Pwnage Tool and click "DFU" at the top and go with this tutorial into the DFU mode. During that process the software gets patched and the custom firmware should run without any problems.
Error 1611
iTunes tried to enter the Restore Mode, but the device turned back to the Recovery Mode.
Error 1618
Missing system files or corrupt data in iTunes installation. Try to uninstall iTunes, restart computer, install again.
Error 1619
iTunes is too old and couldn't read the iPhone in Recovery or DFU Mode. Please update iTunes and try it again.
Error 1644
IPSW was moved during prepare with iTunes. Try it again and don't move the IPSW.
Error 2001
The Mac OS X kernel extension "IOUSBFamily" that was bundled with late 2008 / early 2009 MacBooks, as well as the 10.5.6 update, has a bug where it fails to properly recognize an iDevice in DFU Mode. It can be resolved by updating to 10.5.7 (or later), or using a USB hub.
Also if you have Limera1n opened during you try to restore the iOS device.
Error 2002
iTunes can't connect because another program is using it or it's disconnected during the Apple Server check.
Error 2003
Connection problem; change USB cable and check USB port.
Error 2005
Problem connecting. Probably a hardware failure.
Error 3002
• Update to an older firmware isn't working, because Apple is no longer handing out SHSHs for the device/firmware combination.
• Or a timeout checking Apple server - retry later.
• This error also happens if you try to Update with a local TSS server (TinyUmbrella tool) and probably also when connecting to Cydia Server. Use Restore instead.
Error 3004
No internet connection during the firmware restore. iTunes can't connect to gs.apple.com. Maybe Port 80 and Port 443 is blocked. Open it on your router.
Error 3014
False edited hosts. The SHSH request couldn't be completed. No connection to the Apple Server, Sauriks Server or localhost. iTunes can't connect to gs.apple.com. Maybe Port 80 and Port 443 is blocked. Open it on your router.
Error 3123
Something dealing with movie rentals.
Error 3191
QuickTime corrupted must reinstall before iTunes will work or Turn off Compatibility Mode for QuickTime.
1. Right-click on the QuickTimePlayer application (located in C:Program FilesQuickTime) and choose Properties from the shortcut menu.
2. In the Properties window, click on the Compatibility tab Deselect the checkbox labeled “Run this program in compatibility mode for.”
3. Click Apply.
4. Close the Properties window
Error 3194
Occurs when trying to install an old firmware and Apple's server disallows the installation. The only solution is to have SHSH backup and modify the hosts file to point to Saurik's Cydia Server where they are backed up (or localhost if you have it yourself).
Error 3195
"An internal error occurred." Missing SHSH for the firmware. Maybe the same as "This device isn't eligible for the request build." but with an cache error.
Higher Errors
Error 11222
A security software you have installed may be conflicting with iTunes.
Error 20000
Is caused by a custom theme pack on your Windows. Use default Theme.
This error can also be caused by the iDevice rebooting during the "Extracting Firmware" stage of restore.
Error 20008
This happened on a Mac with TinyUmbrella running before resotring a firmware to the Apple TV.
Hex codes
0xE800001
Device was suddenly unplugged. iTunes couldn't connect with the device. Try it again
0xE8000022
Error in your firmware files. Restore.
0xE800003D
False permissions in the Carrier Bundle folder. Restore, update or fix the permissions from the carrier bundle to update the carrier settings via iTunes.
0xE800006B
Device was suddenly unplugged. iTunes couldn't connect with the device. Try it again.
0xE8000065
sn0wbreeze custom firmware error on USB connection. Unplug the device, reboot it, and plug it in again.
0xE8008001
You are trying to install unsigned (cracked?) apps. Step away from this wiki.
Error 1004
This is caused by a failure to match the Baseband Nonce currently in memory to the nonce returned in the Baseband Firmware SHSH blob. This happens if you edited the hosts file (Saurik's Server) or you are using TinyUmbrella. Use TinyUmbrella and "Kick Device Out Of Recovery" to boot.
Error 1011
This is caused by recovery mode being in (4.2.1 firmware). The file iTunesMobileDevice.dll is damaged or updated.
Error 1013
iPhone 4
This means that the baseband did not get updated. Either remove the gs.apple.com entry from your hosts file and let the baseband upgrade or if you want to preserve the baseband just jailbreak at this point to boot it up.
Other Devices
Restart computer; change computer; reinstall system, if iPhone is always in restoring mode: XP users can jump from restoring mode with ibus; MAC users can use iNdependence. (usually on the iPhone with downgraded
Error 1014
This occurs when you try to downgrade your phone's baseband.
Error 1015
This error is common when downgrading iPhones and 3G-enabled iPads. The problem occurs when the device's baseband has a higher version number than the baseband in the firmware you restored to. Just set auto-boot true in iRecovery or use iREB/TinyUmbrella/RecBoot.
Error 1394
When Spirit2Pwn flashes parts of the boot chain on iOS 4, the device may crash into DFU(Device Firmware Upgrade) Mode. [1]
Error 1413
Restart computer; change USB port; reinstall system.
Error 1415
Restart computer; change USB port; reinstall system.
Error 1417
Restart computer; change USB port; reinstall system.
Error 1418
Restart computer; change USB port; reinstall system.
Error 1428
Restart computer; change USB port; reinstall system.
Error 1050
Bad response from gs.apple.com OR need iReb for preparing iPhone for restoring to custom ipsw
Error 1600
Custom firmware can't be restored on a device with DFU Mode. The software of the iPhone isn't patched. Go into Recovery Mode (Pwnage Tool up to 4.0.1) or start Pwnage Tool and click "DFU" at the top and go with this tutorial into the DFU mode. During that process the software gets patched and the custom firmware should run without any problems.
Error 1611
iTunes tried to enter the Restore Mode, but the device turned back to the Recovery Mode.
Error 1618
Missing system files or corrupt data in iTunes installation. Try to uninstall iTunes, restart computer, install again.
Error 1619
iTunes is too old and couldn't read the iPhone in Recovery or DFU Mode. Please update iTunes and try it again.
Error 1644
IPSW was moved during prepare with iTunes. Try it again and don't move the IPSW.
Error 2001
The Mac OS X kernel extension "IOUSBFamily" that was bundled with late 2008 / early 2009 MacBooks, as well as the 10.5.6 update, has a bug where it fails to properly recognize an iDevice in DFU Mode. It can be resolved by updating to 10.5.7 (or later), or using a USB hub.
Also if you have Limera1n opened during you try to restore the iOS device.
Error 2002
iTunes can't connect because another program is using it or it's disconnected during the Apple Server check.
Error 2003
Connection problem; change USB cable and check USB port.
Error 2005
Problem connecting. Probably a hardware failure.
Error 3002
• Update to an older firmware isn't working, because Apple is no longer handing out SHSHs for the device/firmware combination.
• Or a timeout checking Apple server - retry later.
• This error also happens if you try to Update with a local TSS server (TinyUmbrella tool) and probably also when connecting to Cydia Server. Use Restore instead.
Error 3004
No internet connection during the firmware restore. iTunes can't connect to gs.apple.com. Maybe Port 80 and Port 443 is blocked. Open it on your router.
Error 3014
False edited hosts. The SHSH request couldn't be completed. No connection to the Apple Server, Sauriks Server or localhost. iTunes can't connect to gs.apple.com. Maybe Port 80 and Port 443 is blocked. Open it on your router.
Error 3123
Something dealing with movie rentals.
Error 3191
QuickTime corrupted must reinstall before iTunes will work or Turn off Compatibility Mode for QuickTime.
1. Right-click on the QuickTimePlayer application (located in C:Program FilesQuickTime) and choose Properties from the shortcut menu.
2. In the Properties window, click on the Compatibility tab Deselect the checkbox labeled “Run this program in compatibility mode for.”
3. Click Apply.
4. Close the Properties window
Error 3194
Occurs when trying to install an old firmware and Apple's server disallows the installation. The only solution is to have SHSH backup and modify the hosts file to point to Saurik's Cydia Server where they are backed up (or localhost if you have it yourself).
Error 3195
"An internal error occurred." Missing SHSH for the firmware. Maybe the same as "This device isn't eligible for the request build." but with an cache error.
Higher Errors
Error 11222
A security software you have installed may be conflicting with iTunes.
Error 20000
Is caused by a custom theme pack on your Windows. Use default Theme.
This error can also be caused by the iDevice rebooting during the "Extracting Firmware" stage of restore.
Error 20008
This happened on a Mac with TinyUmbrella running before resotring a firmware to the Apple TV.
Hex codes
0xE800001
Device was suddenly unplugged. iTunes couldn't connect with the device. Try it again
0xE8000022
Error in your firmware files. Restore.
0xE800003D
False permissions in the Carrier Bundle folder. Restore, update or fix the permissions from the carrier bundle to update the carrier settings via iTunes.
0xE800006B
Device was suddenly unplugged. iTunes couldn't connect with the device. Try it again.
0xE8000065
sn0wbreeze custom firmware error on USB connection. Unplug the device, reboot it, and plug it in again.
0xE8008001
You are trying to install unsigned (cracked?) apps. Step away from this wiki.
ليست هناك تعليقات:
إرسال تعليق